NACHI ECKERLE IP PUMP IPH-2B-21G-11 Origin

NACHI Pumps NACHI ECKERLE IP PUMP IPH-2B-21G-11 Origin
Along with constantly improving performance, industrial machines continue to become increasingly sophisticated. NACHI ECKERLE IP PUMP IPH-2B-21G-11 Origin has to meet the challenge of diversifying needs. You may already appreciate the Nachi-Fujikoshi reputation for compact equipment that delivers energy efficiency, safety, and high performance. Our equipment is also constantly refined by our quest for ultimate hydraulics that combine great power with flexible motion control.
PVD Series Piston Pump
One pump discharges two equal amounts of flow to ensure shovel straightness.
Constant horsepower control with full use of engine horsepower, resulting in increased speed and power for mother machine.
Compact size enables installation in a small engine room.
PVS Series Piston Pump
Half-cylindrical swash plate for low noise and low pulsation.
Rich set of options to enable highly efficient, energy-saving equipment.
PZS Series Piston Pump
Half-cylindrical swash plate and 11 pistons for low noise and low pulsation.
Spherical valve plate for high efficiency.
Multiple string option with our IPH series inscribed gear pump.
UVN Series Unipump
Enhanced hydraulic pump and electromotor efficiency for decreased electric consumption.
Compact size for space-saving unit design.
Original connection method between pump and electromotor shaft for low noise and long life.
PVK Series Piston Pump
Constant horsepower control with full use of engine horsepower, resulting in increased speed and power for mother machine.
Load sensing control can be achieved with our DPK load sensing valve, resulting in energy savings for mother machine.
Compact size enables installation in a small engine room.
PZ Series Piston Pump
Half-cylindrical swash plate for low noise and low pulsation
Spherical valve plate for high efficiency (Employed into 3B, 4B and 6B.)
Various capacities ranging from 35 to 220cm3/rev (7 sizes in total)
Multiple string option with our IPH series inscribed gear pump.
The electro-hydraulic proportional control valve uses the proven force feed-back system for improved hysteresis, repeatability, and response.
PVS Series Piston Pump
Half-cylindrical swash plate for low noise and low pulsation
Rich set of options to enable highly efficient, energy-saving equipment.
PZS Series Piston Pump
Half-cylindrical swash plate and 11 pistons for low noise and low pulsation
Spherical valve plate for high efficiency
Multiple string option with our IPH series inscribed gear pump.
SERVICE & VALUE
Our Company is proud to support our quality products with NACHI ECKERLE IP PUMP IPH-2B-21G-11 Origin services before and after the sale.
We have Regional Sales Managers that will work with you to identify opportunities, review requirements, provide training and assist with forecasting and commercial concerns. Our Industry Service Specialists will take it to the next level by providing field services such as; NACHI ECKERLE IP PUMP IPH-2B-21G-11 Origin inspections, hands on training and assistance with installation, inspection, maintenance, reinstallation, field repair and/or factory reconditioning.
We can provide complete NACHI ECKERLE IP PUMP IPH-2B-21G-11 Origin application review by combining the efforts of your operations and maintenance personnel with our design and application engineers. Our Industry Service Specialist’s comprehensive review of the bearings to be inspected or removed from service to determine where you will best benefit from making improvements.
This total approach of application, equipment, products and maintenance will lead to Our company’s goal of helping you establish the best practices for your specific situation resulting in the best value and return on bearing and maintenance expense through improved performance and reduced downtime.
<!-- replace main image when hover over thumbnail -->

NACHI ECKERLE IP PUMP IPH-2B-2.1G-11 *NEW*

Brand: Nachi
Weight: 10

Returns

CNC Salvage, LLC. must be contacted through eBay before sending a unit back for any reason. CNC Salvage must be contacted within 7 days after the item has been received. Returned items must be packaged properly and received within 14 days after the end of the auction. CNC Salvage reserves the right to replace the item in kind or refund the purchase price of the item.

Refunds will be issued only upon receipt of item in good condition if a replacement if not available. We will make every effort to supply a working replacement!

CNC Salvage does not pay for return shipping or refund original shipping. We will not accept returns due to ordering the wrong part number, please be certain that the part number purchased is correct.

Service

You acknowledge your understanding that the items CNC Salvage, LLC displays and sells at this site are surplus and/or previously used. All items displayed at this site are sold AS IS, where is, and as depicted, with all faults, defects and imperfections acknowledged and waived by you, and without any warranties of any kind. This does not mean the items displayed at and sold through this site do not work. It does mean that CNC Salvage, LLC has not tested the items or assessed their performance or operation, and that CNC Salvage, LLC therefore lacks any specific knowledge concerning the condition of the items.

DISCLAIMER OF WARRANTIES CNC Salvage, LLC hereby disclaims, and you waive and release CNC Salvage from, any and all representations, guarantees and warranties of any kind whatsoever, express or implied, regarding any item displayed at or purchased through this site, including but not limited to the following: (1) that such item is merchantable, fit or suitable for any particular use or purpose; and (2) that such item conforms to specifications, industry standards or requirements promulgated by any organization or governmental entity.

BUYERS ASSUMPTION OF LIABILITY/INDEMNIFICATION CNC Salvage, LLC assumes no liability for the use or misuse of any item purchased through this site. CNC Salvage, LLC presumes, and by your purchase of any item from CNC Salvage, LLC you expressly warrant to CNC Salvage, LLC that you will have the item be installed and operated properly and by qualified personnel. You agree to defend, indemnify and hold harmless CNC Salvage, LLC from and against any and all losses, claims, damages, costs, and expenses, including attorney fees, arising from or related to your use of any item purchased from CNC Salvage, LLC.

WAIVER AND LIMITATION OF LIABILITY OF CNC SALVAGE, LLC You acknowledge and agree that CNC Salvage, LLC shall not be responsible or liable for consequential, incidental, statutory, punitive, exemplary or indirect damages of any type whatsoever, in any way directly or indirectly arising from or connected with any item or the use of any item purchased from CNC Salvage, LLC.

<!-- #wpl_wrapper -->